/ King County, WA
Septic service in King County.
Septic pumping, inspections, repairs and required maintenance checks for homes and businesses across King County, from our Kirkland office. Every pumping report is filed with Public Health – Seattle & King County for you.
/ King County quick answer
Who provides septic service in King County?
Septic Response does, from our Kirkland office at 672 7th Ave. We pump, inspect, maintain and repair septic systems in every King County community with septic, from the Sammamish Plateau, Redmond and Woodinville to the Snoqualmie Valley and south King County. Family owned since January 2017, the owners answer every call, and every pumping report is filed with Public Health – Seattle & King County for you.
- Who regulates septic here: Public Health – Seattle & King County. Gravity systems need an inspection every 3 years; pressure, mound, sand-filter, ATU and drip systems need more frequent checks.
- Selling a home on septic: A certified on-site system maintainer must inspect the system before title transfers, unless a waiver applies. We file inspection reports within 24 hours.
- Routine pumping: From $590 with a baffle check and filter cleaning, plus the county report fee and tax. What changes the price.
- On sewer, or switching: We install side sewers and septic-to-sewer connections, and repair and replace sewage ejector and grinder pumps.
- Repairs and emergencies: Pumps, floats, alarms, baffles, risers and drainfields: see septic repair. Backups and alarms: 24/7 emergency service.
- Call: Kirkland office (206) 962-2600, answered 24/7.
/ 01 Services in King County
What we do here.
Septic Tank Pumping
About an hour on site, with the pumping report filed with the county every time.
Learn more →Septic Inspections
Routine King County inspections and real-estate inspections, with reports filed within 24 hours.
Learn more →Septic Repair
Effluent pumps, alarms, floats, risers, lids, baffles and filters.
Learn more →Drainfield Repair
Distribution boxes, laterals, drainfield treatment and replacement.
Learn more →Maintenance & Monitoring
The routine O&M checks King County requires for pump, pressure and advanced systems.
Learn more →Jetting & Sewer Lines
Camera scoping and replacement of the line from your house to the tank.
Learn more →Side Sewers
Licensed side sewer installs and septic-to-sewer connections, with permit help and tank decommissioning.
Learn more →Ejector & Grinder Pumps
Sewage ejector and grinder pump repair, replacement and new installs for homes below or far from the sewer.
Learn more →ATU, Oscar & Bio-Microbics
Aerobic treatment units, including Oscar and Bio-Microbics systems.
Learn more →Emergency? 24/7 emergency septic service →
/ Septic in King County
About 85,000 septic systems. We know the ground they sit in.
King County is better known for its cities than its septic tanks, but roughly 85,000 homes and businesses here treat their own wastewater. They are not evenly spread. Seattle, Bellevue and most of the urban core are on sewer. Septic is concentrated on the edges: the Eastside plateaus, the Snoqualmie Valley, the south county lakes, and the older neighborhoods that were built before the sewer lines reached them. Septic Response has served these areas from our Kirkland office since 2017.
Where King County septic systems are
- The Eastside plateaus. Redmond‘s Union Hill and Novelty Hill, the Sammamish Plateau, Hollywood Hill in Woodinville, Cottage Lake, and Finn Hill and Bridle Trails in Kirkland. Large lots on glacial till, many with pressure systems.
- The Snoqualmie Valley. Duvall, Carnation, Fall City, Snoqualmie and North Bend. Floodplain on the valley floor, till on the ridges.
- The Issaquah Alps and southeast county. Issaquah‘s hillsides, Hobart, Ravensdale and Maple Valley‘s lakes and acreage.
- The south county lakes and plateaus. East Hill in Kent, Lake Meridian, Covington and the rural edges of Auburn and Renton.
- Older in-city pockets. Scattered homes in Shoreline, Burien, Bothell and elsewhere that were never connected to sewer.
What the ground does to a septic system here
Most of King County’s uplands sit on glacial till, a dense, compacted layer left by the last ice sheet. Water barely moves through it, so in winter rain perches on top and moves sideways across yards. Drainfields on till have to spread wastewater thinly, which is why so many Eastside and plateau homes use pressure distribution or mound systems with an effluent pump, floats and an alarm.
The river valleys (Snoqualmie, Green, Cedar and Sammamish) have the opposite problem: soils that drain but a water table that rises close to the surface every winter, and floodplain that sometimes goes underwater. Near the county’s many lakes and salmon streams, the limits are tighter still. That is why King County sets a shorter inspection schedule for alternative systems than for simple gravity systems.
The systems we service across King County
- Gravity systems: a tank and a drainfield, with no pump. Common on older homes and sandy outwash soils.
- Pressure distribution systems: an effluent pump doses the drainfield evenly. The most common design on the plateaus.
- Mound systems: the treatment area is built up above poor soil or a high water table.
- Sand filters and aerobic treatment units: extra treatment before the drainfield, on tight or sensitive lots. We service Oscar, Bio-Microbics and other ATUs.
A King County septic system through the year
Most of the calls we take follow the weather. From November through March, long stretches of rain saturate the glacial till, the water table rises in the valleys, and drainfields have less room to work. That is when alarms go off on pressure and mound systems, when slow drains turn into backups, and when a tank that was “probably fine” turns out to be overdue. If your pumping is coming due, late summer or early fall, before the ground is soaked, is the easiest time to get it done.
Winter storms bring a second problem: power outages. A pump system cannot send effluent to the drainfield without power, so the tank and pump chamber slowly fill while the lights are out. Keep water use to a minimum until the power is back. The alarm may sound for a while as the pump catches up; if it does not clear within a few hours, call us. Our power outage guide walks through it step by step, and our snow and septic guide covers the occasional cold snap in the foothills.
Spring and summer are quieter for emergencies and better for planned work. Drier ground makes it easier to dig up lids, add risers, replace lines or repair a drainfield, with less damage to your yard.
Warning signs worth a call
A septic system usually warns you before it fails. Call us if you notice any of these:
- The alarm is going off. On pump systems it usually means high water in the pump chamber. Cut back on water and read our septic alarm guide.
- Slow or gurgling drains throughout the house, not just one sink. See why drains gurgle.
- A sewage smell inside the house or around the tank or drainfield. See what septic smells mean.
- Wet, spongy or unusually green ground over the drainfield, especially in dry weather. See drainfield failure signs.
- Water backing up into the lowest drain, shower or tub in the house.
Catching these early is almost always cheaper than waiting. A clogged effluent filter or a failed float is a short repair; a drainfield that has been taking solids for months is not. Our guide to the signs your tank is full goes into more detail.
King County septic rules, in plain English
Public Health – Seattle & King County oversees on-site sewage systems, and its revised code (Title 13) took effect April 1, 2025. The parts that matter most to homeowners:
- Inspection schedule. Gravity systems every three years. Pressure distribution, mound, sand filter, ATU and drip systems on a shorter schedule set by the county, or more often if the manufacturer requires it.
- Home sales. A certified on-site system maintainer must inspect the system before the title transfers. Waivers apply in a few cases, such as a recent operation and maintenance report on file or never-occupied new construction. The county reviews reports within about 10 business days.
- Records. Inspection and pumping reports are filed with the county and viewable in its online records. As-built drawings for most systems are on the county’s online map. For older homes that are not online, the county will look them up by parcel number.
- Secure lids. Under the updated code, tank lids must be secured so nobody can fall in or lift them off.
We file every pumping and inspection report for you, and inspection reports go in within 24 hours. Our King County as-built guide walks you through finding your records, and our new-homeowner guide covers what to do in your first year with a septic system.
When sewer reaches your street
As sewer service extends into older neighborhoods, some King County homeowners get the chance to connect. When that happens, the old tank does not simply go away. It has to be pumped out and properly decommissioned so it cannot collapse or become a hazard, and the county needs a record that the system was abandoned. We pump and decommission old tanks and file the county report for you. Once the county has that record, the abandoned system is also one of the cases that does not need a septic inspection when the home is sold.
What happens when we pump your tank
A routine King County pumping visit takes about an hour. First we find the tank, usually by probing from the as-built drawing or from where the sewer line leaves the house. If there is no as-built, or the tank is unknown or hard to find, we use an electronic locator with a flushable transmitter. We carry enough hose for every job, so long driveways, back yards and tanks behind the house are not a problem.
While we pump, we measure the sludge and scum layers, check the inlet and outlet baffles, clean the effluent filter if it can be reached through a lid or riser, and watch for warning signs such as water flowing back from the drainfield. Then we file the pumping report with the county so your records stay current. Our step-by-step pumping guide explains each part, and our guide to how often to pump explains why the right interval depends on your household and your tank.
What King County septic service costs
Routine septic pumping starts at $590, including a tank and baffle inspection and effluent filter cleaning (when the filter is reachable through a lid or riser), plus the county pumping report fee and tax. The final price depends on where you are and how far we drive (diesel is a real cost on rural routes), the size of the tank and how easy it is to reach. We tell you the price before we come. See our pumping cost page for what goes into it.
Habits that protect King County’s lakes and streams
A septic system that works well protects the water King County is known for: Lake Washington, Lake Sammamish, the Snoqualmie and Cedar rivers and hundreds of salmon streams. A few everyday habits do most of the work:
- Flush only toilet paper. Wipes (even “flushable” ones), grease and medicines are behind many of the clogs and pump failures we see. Our what not to flush list covers the rest.
- Skip the additives. A healthy tank does not need them. See do septic tank additives work?
- Spread out the laundry and fix leaks. A running toilet can send hundreds of gallons a day into a drainfield sized for normal use.
- Keep the drainfield clear. No parking, sheds, hot tubs or new paving over it, and grass is the best cover. Point roof drains and sump discharge away from it.
- Know where your tank is. Keep the lids reachable, or add risers so every future visit is quicker. Our guide to finding your septic tank lid can help.
Why King County homeowners call us
We are a family-run company, and our phones are answered 24/7 by people who can actually help. If we cannot get to you that night, we will walk you through it over the phone and be there first thing in the morning. Every repair carries the Septic Response Promise: a one-year warranty on most repairs, and if you call about work we have done, we are there the next day if not the same day.
If you would rather not keep track of any of this, our septic maintenance plan is $10 a month: no emergency fees, next-day emergency service, a free annual filter cleaning and system check, and 10% off all septic services. We keep your service history on file and remind you when your next pumping or county inspection is due.
/ 02 King County communities
Cities we serve.
Pick your city for local details, or use the ZIP checker. Our Kirkland crew covers the whole county, and our Woodinville crew helps on the north end.
- Auburn
- Bellevue
- Bothell
- Burien
- Carnation
- Covington
- Duvall
- Fall City
- Federal Way
- Hobart
- Issaquah
- Kenmore
- Kent
- Kirkland
- Maple Valley
- Newcastle
- North Bend
- Redmond
- Renton
- Sammamish
- SeaTac
- Seattle
- Shoreline
- Tukwila
- Woodinville
In Snohomish County instead? See Snohomish County septic service →
/ Straight answers
How do I find a reliable septic and sewer company in King County?
Choose a company licensed for both septic work and side sewers, with local reviews and written pricing. Septic Response is family-run since 2017, licensed to complete side sewers, and serves King County from our Kirkland office at (206) 962-2600. We have 280 Google reviews, and you get a written price before any work starts.
/ 03 King County FAQ
Questions we hear.
How often does King County require a septic inspection?
Public Health – Seattle & King County requires conventional gravity systems to be inspected every 3 years; pressure, mound, sand-filter, ATU and drip systems need more frequent inspections (county inspection requirements).
Do I need a septic inspection to sell my home?
Yes. In King County, a certified on-site system maintainer must inspect the system before the title transfers, unless a waiver applies (King County: sales and transfers). We file inspection reports within 24 hours.
Do you file the pumping report?
Yes. We file it with the county health department after every pumping.
How fast do I get a report for a home sale?
We file inspection reports within 24 hours to keep your sale on schedule.
Where do I find my septic as-built?
Search King County’s septic records map by address or parcel number for as-built drawings and past inspection reports. No record online? Email as-built.help@kingcounty.gov with your parcel number (details).
Do you service ATUs and advanced systems in King County?
Yes. We service and repair aerobic treatment units, including Oscar and Bio-Microbics systems, plus pump and pressure-distribution systems.
What parts of King County have the most septic systems?
Septic is concentrated outside the urban core: the Eastside plateaus around Redmond, Sammamish and Woodinville, the Snoqualmie Valley, the Issaquah Alps, Maple Valley and the south county lakes, plus older pockets in cities such as Kirkland, Shoreline and Burien.
Why do so many King County homes have pressure or mound systems?
Most of the county’s uplands sit on dense glacial till that drains very slowly. Pressure distribution and mound systems spread wastewater thinly or raise the treatment area, so they work where a simple gravity drainfield would not. They need inspections more often than gravity systems.
How much does septic pumping cost in King County?
Routine pumping with Septic Response starts at $590, including a tank and baffle inspection and effluent filter cleaning (when the filter is reachable through a lid or riser), plus the county pumping report fee and tax. Location, fuel, tank size and access can change the price, and we confirm it before we come.
What should I do if my septic alarm goes off during a storm?
Cut back on water use right away: no laundry, dishwasher or long showers. On pump systems the alarm usually means high water in the pump chamber, often after a power outage or heavy rain. If power was out, the alarm may clear on its own as the pump catches up. If it does not clear within a few hours, call us 24/7 at (206) 962-2600.
What happens to my septic tank when my home connects to sewer?
The old tank has to be pumped out and properly decommissioned so it cannot collapse or become a hazard, and the county needs a record that the system was abandoned. Septic Response pumps and decommissions old tanks and files the county report for you.
How do I find a reliable septic and sewer company in King County?
Look for a company licensed for septic work and side sewers, with local Google reviews, a real local office and a price in writing before work starts. Septic Response has served King County from Kirkland since 2017; call (206) 962-2600.

